Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
  • #25780

    I have big problems with the placement of elements on LayerSlider. On your preview page it is possible to change the browser width. The elements (background but also single placed transparent png images) move dynamically on the “stage”. Thus, the position of all single elements/images remains the same in relation to the total browser size.

    It is not possible to implement this “element-behavior” on my page. The elements do not move with the changing browser size. Single Images are fixed. I tried it with visual place, but also with percentage placement. In last case, the images overlap.

    I need support please, because I have a launch date and I don’t get this problem solved.



    Go to LayerSlider WP > Slides > Global Settings > Slider width, set this to 100%. After that look for “Layers Container”, set a specific width. This will constrain the layer slider elements to a specific width.

    ” This feature is needed if you are using a full-width slider and you need that your layers forced to positioning inside a centered custom width container. Just specify the width of this container in pixels! Note, that this feature is working only with pixel-positioned layers, but of course if you add left: 50% position to a layer it will be positioned horizontally to the center, as before!”

    Import the dummy data then check the default layer sliders.




    Use 1210 px is the better example!



    @qamarqrsh: Thanks for the tip. Yes, it could be a better. :)



Viewing 4 posts - 1 through 4 (of 4 total)

The topic ‘Positioning on LayerSlider’ is closed to new replies.